Cellular RasPi – Internet and Remote Connections on the Raspberry Pi
There are many ways to provide internet to your Raspberry Pi so you may browse the internet or enable remote applications. Depending on your application requirements, different methods exist that must be evaluated in order to determine the correct one
SparqEE CELLv1.0 kit -Full cellular development! RasPi or Arduino shields.
Brought to you by SparqEE.com What Is It? The CELLv1.0 is an easy-to-use cellular development kit. Add it to your Arduino, Raspberry Pi, or any other project you have to instantly add wireless communications capable of operating anywhere in the
Umbrella USB available on online retailers
Umbrella USB is now available for purchase at two online retailers. We launched the SparqEE Store on December 2014 with the Umbrella USB as the first product for sale on the store. This month Amazon.com began selling Umbrella USB as
Kickstarter launch: Umbrella USB
On Tuesday, June 3rd, SparqEE launched its second Kickstarter campaign for Umbrella USB. Within 8 hours of the launch the campaign raised 26% of its funding goal. https://www.kickstarter.com/projects/sparqee/umbrella-usb What is Umbrella? If you charge via USB – which all
7 SparqEE boards, on RS-Components and Digispark
RS-Components and their Digispark community released a blog post about their recent listing of all 7 SparqEE boards from our first Kickstarter! Take a look at: http://www.rs-online.com/designspark/electronics/eng/blog/bringing-cellular-networking-connectivity-to-raspberry-pi-and-arduino
RS Components now selling the SparqEE CELLv1.0 and its Raspberry Pi and Arduino shields
Today RS Components started selling the SparqEE CELLv1.0 cellular board, developmental board and shields for the Raspberry Pi and Arduino. Visit the RS Components store to buy your CELLv1.0 gear. In 2013, SparqEE launched a successful Kickstarter campaign for the
SparqEE’s CELLv1.0 – Named One of Engadget’s Top 10 Crowdfunding Projects of 2013!
Distributor Interested in CELLv1.0!
SparqEE received great news that a well-known distributor is interested in manufacturing the CELLv1.0. Further details about the distributor and the details are planned to be disclosed at a later time. Dear Kickstarter friends, this interesting development means the CELLv1.0
CELLv1.0 Progress – Doing it right
The serial entrepreneur in me is screaming “GET IT DONE” constantly, but my hare-brained personality needs to be a little more turtle-ish for this one. It’s been just over a month since the Kickstarter successfully funded and it feels like
Kickstarter Fully Funded!
On August 20, 2013, SparqEE launched its first Kickstarter project with a funding goal of $70,000; see the press release for additional information. On September 19, 2013, the Kickstarter project exceeded the funding goal. The community pledged $72,155 toward the
Recent Comments